Filter
Top Products
Section 7 COPIER MANAGEMENT FUNCTIONS
7-57
● Auto sleep ON/OFF
Perform the following procedure to set whether or not the auto sleep
function will engage automatically.
1
Display the “Machine default” screen.
(See “(2) Accessing the machine default settings” on
page 7-41.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Select “Auto sleep” in the settings list on the left side of the
touch panel and then touch the “Change #” key.
The “Auto sleep” screen will be displayed.
Inch specifications
Date/Time
Time difference
Management code change
Auto sleep
Energy Saver key setting
Default setting / Counter
2001/10/30 14:02
GMT+08:00
5000
On
Low power mode
Default menu
Down
Change #
Setting mode
Up
Machine default
Close
Metric specifications
Machine default
Date/Time
Time difference
Change MGMT code with #
Auto sleep
Energy Saver key setting
30/10/'01 14:02
GMT+08:00
5000
On
Low power mode
Up
Down
Change #
Close
Default setting
Default menu Setting mode
Default setting / Counter
3
Touch the “On” key if you want to use the auto sleep function.
Inch specifications
On
Off
Auto sleep
Default setting - Machine default
CloseBack
Autom. turns into sleep mode if no oper. within a set time
after last setting,or when copying is done.
Metric specifications
Autom. turns into sleep mode if no oper. within a set time
after last setting,or when copying is done.
Back Close
On
Off
Auto sleep
Default setting - Machine default
NOTES
• If auto sleep interferes with your copying operations, turn this
function OFF. However, it is recommended that you try to set a
longer time interval until auto sleep engages before you actually turn
it OFF.
• If you want to quit the displayed setting without changing it, touch
the “Back” key. The touch panel will return to the screen in step 2.
4
Touch the “Close” key. The touch panel will return to the
screen in step 2.
5
Touch the “Close” key once again. The touch panel will return
to the “Default setting”screen.
6
Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.