Kyocera 5035 Copier User Manual


 
Section 7 COPIER MANAGEMENT FUNCTIONS
7-64
Exposure adjustment step
Perform the following procedure to change the incremental step to be
used during adjustment of the copy exposure.
1
Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-62.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Select “Exposure steps” in the settings list on the left side of
the touch panel and then touch the “Change #” key.
The “Exposure steps” screen will be displayed.
Inch specifications
Copy default
Default setting
Exposure mode
Exposure steps
Original image quality
Eco Print
Background exp. adj.
Manual
1 step
Text + Photo
Off
Standard
Default menu
Down
Change #
Setting mode
Up
Close
Default setting / Counter
Metric specifications
Copy default
Exposure mode
Exposure steps
Image quality original
Eco Print
Background exp. adj.
Manual
1 step
Text + Photo
Off
Standard
Default menu Setting mode
Up
Down
Change #
Close
Default setting
Default setting / Counter
3
Touch the “1 step” key or the “0.5 step” key, as appropriate.
Inch specifications
Select step of copy exposure.
Exposure steps
Default setting - Copy default
CloseBack
1 step
step
Metric specifications
Select adjustment step of copy exposure.
Back Close
1 step
0.5 step
Exposure steps
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4
Touch the “Close” key. The touch panel will return to the
screen in step 2.
5
Touch the “Close” key once again. The touch panel will return
to the “Default setting”screen.
6
Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.