Filter
Top Products
Section 7 COPIER MANAGEMENT FUNCTIONS
7-81
● Erased border width
Perform the following procedure to determine the default value for the
width of the border to be erased in the two border erase modes.
1
Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-62.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Select “Default erase width” in the settings list on the left side
of the touch panel and then touch the “Change #” key.
The “Default erase width” screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Change #
Default setting
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Sort : On / Offset : Off
Rotate
Left
1
/4" 0"
Border
1
/4" Center
1
/2"
999 Set
Default menu
Down
Setting mode
Up
Close
Metric specifications
Default setting / Counter
Copy default
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Sort : On / Group : Off
Rotate
Left 6mm 0mm
Border 6mm Center 12mm
999 Set
Up
Down
Change #
Close
Default setting
Default menu Setting mode
3
Touch the “+” key or the “-” key under the “Border” and
“Center” fields to change the displayed widths to those
desired.
Inch specifications
Border
Center
""
Adjust default setting of erase width.
Default setting - Copy default
1
/4
1
/2
++
––
(0~
3
/4) (0~1
1
/2)
Default erase width CloseBack
Metric specifications
Default erase width
Back Close
Border
Center
mm mm
(0~18) (0~36)
Adjust default setting of erase width.
Default setting - Copy default
6
12
++
––
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4
Touch the “Close” key. The touch panel will return to the
screen in step 2.
5
Touch the “Close” key once again. The touch panel will return
to the “Default setting”screen.
6
Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.