Kyocera 5035 Copier User Manual


 
Section 7 COPIER MANAGEMENT FUNCTIONS
7-82
Copy limit
Perform the following procedure to set the limit for the number of
copies (or copy sets) that can be made at a time.
1
Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-62.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Select “Preset limit” in the settings list on the left side of the
touch panel and then touch the “Change #” key.
The “Preset limit” screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Change #
Default setting
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Sort : On / Offset : Off
Rotate
Left
1
/
4
" 0"
Border
1
/
4
" Center
1
/
2
"
999 Set
Default menu
Down
Setting mode
Up
Close
Metric specifications
Default setting / Counter
Copy default
Sort
Auto Rotation
Default margin width
Default erase width
Preset limit
Sort : On / Group : Off
Rotate
Left 6mm 0mm
Border 6mm Center 12mm
999 Set
Up
Down
Change #
Close
Default setting
Default menu Setting mode
3
Touch the “+” key or the “-” key to change the copy limit to
the desired setting.
Inch specifications
Set output quantity.
Preset limit
Default setting - Copy default
Set
~
CloseBack
+
Metric specifications
Select copy preset in one job (# key).
Back
Close
Preset limit
Default setting - Copy default
Set
~
NOTE
If you want to quit the displayed setting without changing it, touch the
“Back” key. The touch panel will return to the screen in step 2.
4
Touch the “Close” key. The touch panel will return to the
screen in step 2.
5
Touch the “Close” key once again. The touch panel will return
to the “Default setting”screen.
6
Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.