Filter
Top Products
Section 7 COPIER MANAGEMENT FUNCTIONS
7-71
● Cover drawer[cassette]
Perform the following procedure to set which drawer[cassette] will be
used to feed the cover sheets in the cover mode, the booklet/stitching
mode and the book to booklet mode.
1
Display the “Copy default” screen.
(See “(5) Accessing the copy default settings” on page 7-62.)
Inch specifications
Default setting
Copy
default
Machine
default
Language Management
End
BOX
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
Metric specifications
Default setting
Copy
default
Machine
default
Language Management
End
Hard Disk
Management
Bypass
setting
Document
Management
Register
orig. size
Print
report
Counter
check
User
Adjustment
Default setting / Counter
2
Select “Drawer for cover paper” [“Cassette for cover paper”]
in the settings list on the left side of the touch panel and then
touch the “Change #” key.
The “Drawer for cover paper” [“Cassette for cover paper”]
screen will be displayed.
Inch specifications
Copy default
Select paper
Select paper type(APS)
Default drawer
Drawer for cover paper
Default magnification
APS
Plain
1st paper
Bypass
Manual
Up
Change #
Close
Default setting
Default menu Setting mode
Down
Default setting / Counter
Metric specifications
Copy default
Select paper
Select paper type(APS)
Default cassette
Cassette for cover paper
Default mode
APS
Plain
1st paper
Bypass
Manual
Up
Change #
Close
Default setting
Default menu Setting mode
Down
Default setting / Counter
3
Touch the key that corresponds to the desired
drawer[cassette].
Inch specifications
Drawer for cover paper
Select drawer for cover paper.
1st paper
2nd paper
3rd paper
Default setting - Copy default
4th paper
Bypass
CloseBack
Metric specifications
Cassette for cover paper
Back Close
Select cassette for cover paper.
Default setting - Copy default
1st paper
2nd paper
3rd paper
4th paper
Bypass
NOTES
• If you want to quit the displayed setting without changing it, touch
the “Back” key. The touch panel will return to the screen in step 2.
• The setting for drawer[cassette] No.3 and No.4 will only be available
when the optional Paper Feeder is installed on your copier.
4
Touch the “Close” key. The touch panel will return to the
screen in step 2.
5
Touch the “Close” key once again. The touch panel will return
to the “Default setting”screen.
6
Touch the “End” key. The touch panel will return to the
contents of the “Basic” tab.