Filter
Top Products
Specifications
C-2
Specifications
Item Description
FS-3820N FS-3830N
Printing method Electrophotography, laser scan
Printing speed 29 pages/minute (Letter size) when
printing multiple copies of the same
page
35 pages/minute (letter size) when
printing multiple copies of the same
page
Resolution
Fast 1200 mode with KIR (Kyocera Image Refinement)
Fine 1200 mode
600 dpi with KIR (Kyocera Image Refinement)
300 dpi with KIR (Kyocera Image Refinement)
First print Approx. 19.5 seconds or less (A4
size), depending on input data
Approx. 26.5 seconds or less (A4
size), depending on input data
Warm-up time Approx. 10 seconds or less
(from sleep mode)
Approx. 18 seconds or less
(from power on)
at 23 °C, 120 or 230 V
Approx. 15 seconds or less
(from sleep mode)
Approx. 20 seconds or less
(from power on)
at 23 °C, 120 or 230 V
Controller PowerPC 750CXe (300 MHz)
Main memory 64 MB, expandable up to 320 MB 96 MB, expandable up to 576 MB
Interfaces Parallel IEEE1284, 1
USB Hi-Speed USB 2.0 (480 Mbps)/Full-Speed USB 2.0 (12 Mbps), 1
Network Protocol support: TCP/IP, IPX/SPX, NetBEUI, EtherTalk, 1
Option Serial interface/Network interface card, 1
Memory card slot 1 (CompactFlash card)
Hard disk slot 1 (Microdrive)
Self test Performed at power-up
Maximum duty cycle 125,000 pages/month 175,000 pages/month
Drum Amorphous silicon drum
Toner saving Ecoprint mode
Paper Plain paper (See Chapter 2)
Paper feed trays Cassette A5 to A4/Letter universal cassette 148 to 216 mm × 210 to 297 mm. Holds
500 sheets of thickness 0.11 mm
For U. S. A.: A5 to A4/Letter and Legal universal cassette 5-13/16 to 8-1/2"
× 8-1/4 to 14"
MP tray 70 to 216 mm (2-3/4 to 8-1/2") × 148 to 297 mm (5-13/16 to 11-11/16") (see
page 2-4). Holds 100 sheets of thickness 0.11 mm
Capacity of output
trays
Top tray 250 sheets of thickness 0.11 mm
Rear tray
(Option)
PT-4: 250 sheets of thickness 0.11 mm
PT-60: 100 sheets of thickness 0.11 mm
Table C-1