Kyocera FS-3820N Printer User Manual


 
e-MPS
1-56
e-MPS
e-MPS is an abbreviation for ‘enhanced-Multiple Printing System’ which
implements the following functions that are available from the printer
driver:
Job Retention
Job Storage
In either job mode, when printing a document, the print data is transferred
from the computer to the printer then stored on the printer’s hard disk.
Since copies of the document are printed using the stored data, printing is
performed faster with less computer spooling time and less network traffic.
To use the e-MPS system, an option hard disk must be installed in the
printer. For details, see Appendix A Options.
The RAM disk may also be used in the Proof-and-Hold and Private
Print modes. See Activating the RAM Disk on page 1-81 for details on
RAM disk setup.
Job Retention
Job Retention has four modes as summarized below. These modes are
selected when you choose on the printer driver through the application
software:
Note
Mode Quick Copy Proof and Hold Private Print Stored Job
Primary function To later print
additional copies
To proof the first copy
before printing
multiple copies
To hold the document
in printer to prevent
unauthorized access
To electronically
store documents such
as fax cover pages
Start storing by Printer driver Printer driver Printer driver Printer driver
On terminating print
setting from
application software
Prints
simultaneously
Prints one copy
simultaneously
Does not print Does not print
Retrieved by Operator panel Operator panel Operator panel Operator panel
Default number of
copies printed at
retrieval
Same as storing
(can be changed)
One less
(can be changed)
Same as storing
(can be changed)
One
(can be changed)
Maximum number of
jobs stored
32, expandable to 50 32, expandable to 50 Depends on the hard
disk capacity
(Private jobs are
deleted automatically
once it is retrieved.)
Depends on the hard
disk capacity
PIN security No No Yes Yes (if necessary)
Data after printing Stored Stored Deleted Stored
Data at power off Deleted Deleted Deleted Stored
Hard disk required Yes No No Yes
Table 1-7
Jobs in excess will cause the earlier ones to be deleted.