Filter
Top Products
Interface
1-77
6
Press the > key. Each time the or key is pressed, the setting item
and current setting change as shown below.
7
Display the setting item to be changed and press the ENTER key. A
question mark (?) appears.
The following example explains how to change the baud rate. The
settings for other items can be changed in a similar manner.
8
Press the or key to display the desired setting. The setting
changes as shown below.
The baud rate can be selected from 1200, 2400, 4800, 9600 (default),
19200, 38400, 57600, and 115200.
Some computers may not be compatible with a baud rate of 115200 bps.
If you set the baud rate to 115200 and communication problems occur,
lower the baud rate.
9
Display the desired baud rate and press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
>Baud Rate
9600
>Data Bits
8
>Stop Bits
1
>Parity
None
Definable baud rates: 1200, 2400, 4800,
9600 (default), 19200, 38400, 57600,
115200
Definable data bits: 7, 8 (default)
Definable stop bits: 1 (default), 2
Definable parity: None (default), Odd, Even,
Ignore
>Protocol
DTR(pos.)&XON
Definable protocol: DTR(pos.)&XON
(default), DTR(positive), DTR
(negative), XON/XOFF, ETX/ACK
>Baud Rate
? 9600
Note