Filter
Top Products
Pagination
1-52
KIR (Kyocera Image Refinement)
This printer incorporates the KIR (Kyocera Image Refinement) smoothing
function. This function provides high print quality by providing software
enhancement of print resolution.
Set the print density to 3 when setting the KIR mode. For details on print
density, see page 1-95.
Look at the check line, the last line on a status page, to make the optimum
KIR mode setting.
With KIR Off With KIR On (default)
Q
Note
KIR Test pattern ON
Memory
Installed Options
Network Status
Emulation
Toner Gauge
0
100
Interfaces
Hardware Information
Page Information
Error Log
STATUS PAGE
FS-3830N Page Printer
Firmware Version: Released:
Status Page
KIR Checking
Lines
Optimized stripes
The current KIR setting is optimal.
Dark vertical stripes
Set the KIR mode to Off. Try printing the status
page again. If you still get dark vertical stripes,
adjust the print density control to a lighter setting.
White vertical stripes
Set the KIR mode to On. Try printing the status
page again. If you still get white vertical stripes,
adjust the print density control to a darker setting.