Filter
Top Products
17
Setup
2
Remove the base plate stopper from inside the media cassette; refer
to the instruction sheet attached to the cassette.
3
Push down on the metal plate until it clicks, locking it in place.
4
Fan the media (paper/transparencies), then tap it on a level surface
to avoid media jams or skewed printing.
Notes:
• To optimize your printer’s performance, always use clean, unused media.
• Be careful not to leave fingerprints on the media, which can result in a smudged
print.
• Reusing media that has been fed through the printer once (for example, after jams)
can reduce the life of the consumables and paper path components.
• Recommended transparency types are 3M CG3700 and 3M CG3710. If the print
quality is poor, print on the other side.
(1)
(2)
(3)
(4)
(5)
Base plate stopper