Filter
Top Products
39
Using the Printer
■ Number of copies
The Number of copies menu sets the number of copies to be printed.
Level 1 Range
Number of copies 001 (Default) to 999
■ Emulation
The Emulation menu switches the printer emulation. KPDL is the Kyocera’s
implementation of the Adobe’s PostScript language. KPDL (AUTO) automatically
switches the printer emulation.
Level 1 Range
Emulation PCL 5C
KPDL
KPDL (AUTO)
Notes:
• For details about the emulation menu, see the table marked “
*1
” on page 34.
• The printer can be set to print error data during KPDL emulation. If this is set to
On, error data will be printed if trouble occurs during printing. This is set to Off
before leaving the factory.
■ Font
The Font menu selects the printer font. The fonts available vary depending on the
emulation.
Level 1 Range Options Description
Font Bitmap Fontnumber See Font Number on list of resident
fonts that can be printed by referring
to List of Resident Fonts (☞ P. 48).
Scalable Fontname See the tables on pages 41 to 42.
Size 004.00 to 999.75 (points)
Pitch 00.44 to 99.99 (cpi)
Note:
The >Size menu is not available for the Courier and LetterGothic fonts. Use the
>Pitch menu to scale these fixed fonts.
For example, to select the 10-point Dutch801-RomanSWM:
1
Press MODE.
2
Press the + key repeatedly until the message display shows Font >.
3
If the Font > menu shows Scalable, proceed to step 4. If it shows
Bitmap, press ENTER (The question mark appears blinking), press
+ (Bitmap changes to Scalable), then press ENTER (The question
mark disappears).
4
Press the key. The current scalable font is indicated.