Kyocera FS-5900C Printer User Manual


 
52
Using the Printer
RAM DISK Operations
The following operations are available with the RAM DISK.
• Read Data
Write Data
Delete Data
• Print a List of Data Names
Print Accumulated VMB Data
Print VMB List
Except for printing accumulated VMB data and printing a VMB list, procedures for all
operations are the same as for a memory card. Please see the memory card item for the
given procedure.
Virtual Mail Box (VMB)
The Virtual Mail Box (VMB) function is a mail box function for the printer which does not
require a physical mail box to be attached to the printer. The virtual mail box function
can be used when RAM DISK mode is On or when an optional hard disk unit is installed
on the printer. (The RAM DISK cannot be used when the optional hard disk is installed.)
This manual describes how to use the virtual mail box with a RAM DISK.
With a virtual mail box, unlike a physical mailbox, data sent from the computer is stored
in the RAM DISK as rasterized data. This stored data accumulates in a numbered virtual
output tray. When it is time to actually print the data, it is printed by specifying the
virtual output tray number where the data is stored using the printer’s control panel or
an optional barcode reader (BC-1).
Note:
If all the data in a virtual output tray is printed, all data in that tray will be deleted.
If printing is halted by pressing the CANCEL key during printing, data in that tray
will not be deleted. Data is not deleted unless all data in the virtual output tray is
printed.
Locked mailbox
Allowing a password to be set for the virtual output tray, this feature makes the
printout of confidential documents easy.
Multilevel mailbox
Supporting up to 255 virtual output trays, mail boxes can be allocated at the
individual level rather than by the user’s job title or group.
Large capacity mailbox
There is no limit on the size per virtual output tray. Since the only limit is on the
total size of all trays, all of the RAM DISK can be used.