Filter
Top Products
Supplying Toner
☛ Before proceeding, take note of the following:
Do not leave floppy disks etc. lying around while performing this mainte-
nance procedure. This procedure tends to raise a little toner dust which can
harm magnetic recording media.
Do not attempt to reuse the waste toner remaining in the toner container.
Use only the toner kit exclusively designed for the printer. Use of a toner kit
intended for use with other printer models may damage the printer and
void the warranty.
To replace the toner container, proceed as follows.
1. Open the printer’s top cover all the way.
2. Press the toner container release lever
(Green ) to release the old toner container
from the printer. Remove the old toner
container as gently as possible.
☛ Keep the toner container as level as
possible while removing.
3. Put the old toner container in the plastic
bag supplied with the toner kit. Dispose
of the toner container.
☛ The old toner container may be in-
cinerated without the risk of gener-
ating harmful gas.
4. Take the new toner container from its
bag.
With the label side down, thoroughly
shake the toner container (in the direc-
tion of the arrow) ten times or more to
loosen and mix the toner inside.
Top Cover
Plastic Bag
Old Toner Container
New Toner Container
Toner Container
Release Lever (Green )
Old Toner
Container
4.1. Toner Kit Replacement
4-2