Filter
Top Products
*1:
Depending on the emulation selected, the following code sets
are available.
HP LaserJet 4
Plus
IBM Proprinter
X24E or Line
Printer
DIABLO 630 EPSON LQ-850
Bitmap and Scalable Fonts
ISO 6: ASCII
ISO 11: Sweden
ISO 15: Italian
ISO 17: Spain
ISO 21: Germany
ISO 60: Norway
ISO 69: France
HP Roman-8
ECMA-94 Latin 1
US Legal
IBM PC-8
IBM PC-8 (D/N)
IBM PC-850
ISO 4: U.K.
IBM US
IBM D/N
IBM PC-850
IBM PC-860
IBM PC-863
IBM PC-865
US Legal
DIABLO US
DIABLO France
DIABLO Germany
DIABLO U.K.
DIABLO Denmark
DIABLO Sweden
DIABLO Italy
DIABLO Spain
DIABLO Japan
US Legal
LQ US
LQ France
LQ Germany
LQ U.K.
LQ Denmark
LQ Sweden
LQ Italy
LQ Spain
LQ Japan
LQ Norway
LQ Denmark 2
LQ Spain 2
Latin America
IBM US
IBM D/N
IBM PC-850
IBM PC-860
IBM PC-863
IBM PC-865
Scalable Fonts
Only
Ventura Math
Ventura International
Ventura US
PS math
PS text
Math-8
Pi font
MS publishing
Windows 3.0
Desktop
ISO Latin 2
ISO Latin 5
Windows Latin 1
Windows Latin 2
Windows Latin 5
PC-852 Latin 2
PC-Turkish
Macintosh
*2:
Your dealer can install the KPDL (Kyocera’s version of Adobe’s
PostScript command language) upgrade kit in your printer. The
printer needs at least 3 (2) MB of memory in order for the KPDL
option to work properly.
*3:
The printer can be set to print error data during KPDL emula-
tion. If this is set to , error data will be printed if trouble oc-
curs during printing. This is set to before leaving the
factory.
*4:
The menu is not available for the Courier and Letter-
Gothic fonts. Use the menu to scale these fixed
fonts.
*5:
Any value from 0 to 495 [seconds] in 5-second increments. (The
printer does not time out with the value set to 0.)
*6:
Any value from 0 to 120 [minutes] in 5-minute increments.
*7:
When ON, the following changes made with panel keys are kept
in permanent memory so that they are not lost when power is
switched off.
Copy count
Emulation
Font
Code set
Page orientation
Auto cassette mode
Formfeed time-out time
Linefeed action
Carriage-return action
KIR mode
*8:
is the default setting, and this selection does not usually
appear in the MODE SELECT menu. In the event of a
error due to insufficient
printer memory, the printer automatically switches to page pro-
tect mode . In such a case this selection will appear in the
MODE SELECT menu.
In order to maintain efficient use of printer
memory, the setting should normally be set to
.
*9:
Resouce protection is available only when the printer has more
than 10 MB (14 MB if the duplexer is on) of additionally in-
stalled main memory.
*10:
For service purpose only.