Filter
Top Products
6
Advanced Operations
6-10 KM-C1530
Sorting/Grouping
✎
Note
How pages are fed depends on whether the following options are
installed and on whether the pages are being copied or printed.
- 10-Mailbin sorter (AS-M4110) and a printer controller
- Finisher (F-8430 or F-8110) and a printer controller
Setting Options Installed Operation
Non-Sort 10-Mailbin Sorter (AS-
M4110)
For a copy job or for a print job* where a
mailbin is not specified, the output is fed into
mailbin 1. When the bin reaches its
maximum capacity, the output is fed into the
next mailbin.
For a print job where a mailbin is specified,
the output is fed into the specified mailbin.
Finisher (F-8430 or F-
8110) and a printer
controller
For a copy job, the output is fed into the
upper paper output tray.
For a print job*, the output is fed into the
lower paper output tray. While printing,
printouts of paper sizes and types not
compatible with the lower paper output tray
are fed into the upper paper output tray. For
more details, refer to page 11-6 and
page 11-7 of “11 Appendix”.
Sort 10-Mailbin Sorter (AS-
M4110)
For a copy job, the output is fed into mailbin
1.
The number of mailbins that can be used to
receive the output can be set between a
maximum of 10 and a minimum of 2,
according to the “Mail Bin Assignment”
parameter setting. For more details, refer to
the section “To set the “Mail Bin
Assignment” parameter” on page 7-14.
For a print job* where a mailbin is not
specified, the output is sorted and fed into
mailbin 1.
For a print job* where a mailbin is specified,
the output is sorted and fed into the
specified mailbin.
Finisher (F-8110 or F-
8430) and a printer
controller
For a print job*, the printed sets of pages are
sorted and fed out into the lower paper
output tray shifted to opposite sides so that
they are separated from each other.
None For a print job*, the printouts are sorted and
fed out into the normal copy output tray.