Filter
Top Products
Touch Panel Messages
9
KM-C1530 9-45
Sorter has reached its
capacity.
Remove all pages from bins
before proceeding.
X- X bin
The indicated bin of the 10-
mailbin sorter has reached
its maximum capacity, so the
copy operation cannot
continue.
Remove all copies from the
indicated bin.
Original’s size cannot be
detected. Reselect the paper
size.
• The document is not
positioned correctly.
• A document with an
unspecified size or with a
size too small to be
detected is loaded.
• Position the document
correctly.
• Select the correct paper
size.
The following Max.# of sets
for sorting.
10
When copying while sorting,
a number of 11 or higher was
specified for the number of
copies.
When copying while sorting,
specify a number of 10 or
less for the number of
copies.
Matching paper size is not
available. Reselect paper
size.
Paper of a suitable size is not
loaded in a paper drawer.
Either select a different copy
size or manually feed paper
of a suitable size.
Re-insert the following
# of originals:
After clearing a paper
misfeed, it is necessary to
reload the documents that
have already been fed
through the document
feeder.
Load the indicated document
pages into the document
feeder.
Original left on the Glass. The document was left on
the original glass.
Remove the document from
the original glass.
This mode cannot be
selected with the XXXXXX.
Functions that cannot be
used together are selected.
Make copies using only one
of the functions.
Image data caused a
memory overflow.
Your job has been canceled.
A new
memory set up is
recommended.
Please Select a Compress in
Compress
Mode.
There is not enough memory
to scan.
On the [Orig.
Ö
Copy]
screen, touch [Compress
Mode], and then touch
[Compress] to turn it on
before trying to make copies.
p. 6-4
If the same message
appears again, install the
optional memory.
Your account has reached its
maximum allowance.
The limit on the number of
copies that can be made has
been reached.
Contact your administrator.
p. 8-11
Message Cause Remedy