Filter
Top Products
8
Administrator Mode Operations
8-18 KM-C1530
8.4 Erasing Copy Edges (“Erase” Function)
This function can be used to set the width of loss at the edge of the copy
to either 5 mm (0.2 in.) or 7 mm (0.3 in.), as needed. The default setting
is 5 mm (0.2 in.).
To set the “Erase” function
Note)
✔ Discuss any changes to this function with your service representative.
1
Press the [Utility] key to enter Utility
mode.
2
Touch [Administrator Mode].
3
Using the keypad, enter the four-
digit administrator access code.