Filter
Top Products
Before Making Copies
2
KM-C1530 2-11
* The original cover, scanner rack, and copy desk shown installed in the
illustration are optional.
No. Part Name Description
1 Copy output tray Holds copies fed out of the copier
2 Toner supply door Opened when adding toner
3 Front door Opened when replacing the imaging unit
See p. 9-43.
4 1st drawer Holds 250 sheets of paper
The paper size can be adjusted freely.
Special paper can be used. See p. 3-7.
5 2nd drawer Holds 500 sheets of paper
The paper size can be adjusted freely. See p. 3-13.
6 Power switch Used to turn the copier on and off
See p. 2-29.
7 Right-side door Opened when servicing the copier and clearing misfeeds
8 Right-side door release
lever
Used to open and close the right-side door
9 Manual bypass tray Used for manual feeding of paper
The paper is fed one sheet at a time.
Special paper can be used. See p. 3-17.
10 Lower right-side door Opened when clearing misfeeds
11 Left-side door Opened when servicing the copier
12 Original cover
(optional)
Presses the document against the original glass
13 Document scale Used to align the document
See p. 4-11.
14 Original glass When manually feeding the document, place it on the glass
so the document can be scanned.
Place the document face down on the glass. See p. 4-10.
15 Control panel Used to start copying or to make settings
See p. 2-20.
16 Duplexing document
feeder connector
Used for connecting the duplexing document feeder
hookup cord
17 Scanner connector Used for connecting the scanner hookup cord
18 Scanner power cord
socket (inlet)
Used for connecting the scanner’s power cord
19 Scanner power cord
socket (outlet)
Used for connecting the scanner’s power cord
20 Scanner connector Used for connecting the scanner hookup cord
21 Printer power cord
socket
Used for connecting the printer’s power cord
22 Sorter/finisher
connector
Used for connecting the sorter or finisher hookup cord