Filter
Top Products
3
Copy Paper
3-10 KM-C1530
5
Slide the lateral guides against the
edges of the paper.
❍ Make sure that the paper is not
curled when it is loaded.
Check that the lateral guides are
pushed up against the edges of
the paper.
6
Close the paper drawer.
7
Turn the media type selection dial
on the drawer to the setting for the
type of paper loaded.
?
Are postcards loaded into the
1st drawer?
➜ If postcards are loaded into the
1st drawer, set the paper type
dial to “Thick 1”.
✎
Setting the Paper Size
The default setting for the paper size of the 1st drawer is “Auto Detect”.
For postcards, non-standard or metric paper sizes, change the paper
size according to the procedure in the following section.