Filter
Top Products
Copy/Document Server Settings
User Tools 5 - 21
Staple Position Specify which Top 2 staples or Bottom is
shown on the initial display with priority.
Default is Stack.
Paper Eject: Always Rotate 180
degrees
If you want to copy on the paper with
letterhead, the machine rotates the image
correctly. To use this function, select Yes.
Default is No.
Duplex: Auto Eject When making two-sided copies from one-
sided originals, if the last original is an odd
page, the last copy is automatically
delivered with the reverse side blank. You
can cancel this setting.
When you set one original at a time in the
Document Feeder or set an original on the
Exposure Glass, this function does not
come into effect.
The default is Yes.
Combine: Auto Eject As a default setting, even if the number of
originals in the optional Document Feeder is
less than the number required in the
selected Combine mode, the lacking
number of copies are automatically made in
blank. You can cancel this setting.
When you set one original at a time in the
Document Feeder or set an original on the
Exposure Glass, this function does not
come into effect.
The default is Yes.
Memory Full Auto Scan Restart When the memory becomes full while
scanning originals, the copier can make
copies of the scanned originals first, then
automatically proceed to scanning the
remaining originals.
You can enable or disable this function.
If you select Yes:
When the memory becomes full, the copier
stops operating, allowing you to remove the
copy pages delivered on the output tray.
If you select No:
You can have the copier unattended to
make all the copies, but the resulting sorted
pages will not be sequential.
Default is No.
Menu Description