Filter
Top Products
System Settings
5 - 4 User Tools
Low Power Shift TIme Your copier enters Low Power mode
automatically after your job is finished,
after selected time. The time can be set
form 1 to 240 minutes.
Default is 15 minutes.
Low Power Timer Your copier enters the Energy Saver mode
automatically after your copy job is
finished, after the selected time. The time
can be set from 10 to 999 seconds, or 0.
When set to 0, Energy Saver mode will not
be activated,
Default is 60 seconds.
ADF Orig. Ejection (RADF) As a default setting, the scanned originals
from the Document Feeder (RADF) are
ejected to the RADF external tray. But, if
there is no space to attach an RADF
External Tray, you can change the output
tray to the RADF tray.
Default is ADF Ext. Tray.
<F/F4> Size Setting Currently, three types of F sizes are
available; 8.5” x 13”. 8.25” x 13”, and 8”
x 13”.
The Document Feeder sensor cannot
distinguish these three types of originals.
This function sets the F size from the
Document Feeder sensor.
Auto Paper Select or Auto Reduce/Enlarge
is the case of F size originals functions
based on this setting.
Default is 8.5” x 13”.
Menu Description