Filter
Top Products
Document Server
6 - 14 Special Copier Functions
•
Enter the new file name
using the letter keys on the
display panel.
Note: You can enter up to 8
letters.
Note: To switch to the capital
letter mode or small letter
mode, press the Upper Case or
Lower Case key.
Note: To change the letter entered, press the Back Space, Clear, or Clear/Stop key and
enter new letters. To delete the entered letters in 1 letter steps, press the BackSpace key.
To delete all the entered letters, press the Clear or Clear/Stop key.
•
Touch the OK key.
4
Enter your password.
Note: If you do not wish to enter a password, go to step 5.
To set the password
•
Touch the Change Password key.
•
Enter the password using the
number keys (4 digits).
Note: To change the number
entered, press the Clear or
Clear/Stop key and enter a
new number.
•
Touch the OK or # key.
5
Set your originals either on the exposure glass or into the document feeder.
6
Make any desired settings.
Note: Touch the Scanning
Complete key to cancel the file
name, password, or print
settings and return to the
“Document Server: Files”
display.
Note: For details, see the
explanations of each function in this manual.
7
Press the Start key.
The document is saved in the Document Server. The saved documents are displayed on the
“Document Server: Files” display.