Lantronix 900-422 Switch User Manual


 
Appendix E: Compliance Information
XPress DR+ User Guide 114
Europe – R&TTE Directive 99/5/EC, Wireless Notice
This product is designated as a Class 2 type radio device that utilizes non-harmonized
frequencies and power levels for Europe. It is marked with the following warning symbol
to bring to your attention to the fact it might not be legal to use this product in every
country. In most cases this product has already been granted permission for use from
individual countries in Europe. If you are unsure, please contact the communications
authority for the country to be operated in.
In addition to this notice, the following countries in Europe have certain restrictions on the
operation of 2.4 GHz WLAN type devices:
Country Restriction
France
Outdoor use is limited to 10mW E.I.R.P within the frequency
band 2454-2483.5 MHz.
Italy
If used outside of own premises, general authorization is
required
Luxembourg
General authorization required for public service.
Romania
Individual license is required.
Australia & New Zealand – Wireless Notice
This product has been found to be compliant with the wireless regulatory requirements
for Australia and New Zealand and is designated to have met Compliance Level 2.
The compliance mark is designated with the circle and check mark inside is called the “C-
Tick” mark. This C-Tick mark label is located underneath this product and signifies its
compliance, as shown below:
The number “ ACN 095 223 484 “ stands for Australian Company Number and the 9 digit
number designates the local representative in Australia who can take inquiries regarding
this product’s compliance status. The following contact address is found below:
Lantronix Australia Pty. Ltd.
c/o LLK Chartered Accountants
Suite 2, Level 7
122 Walker Street
North Sydney, NSW 2060
Australia