Filter
Top Products
Chapter 7: Configuration Using Telnet or Serial Port (Setup Mode)
XPress DR+ User Guide 65
At this point, the screen display is the same as when you use a Telnet connection. To
continue, go to step 3 in Telnet Connection above.
Exiting Setup Mode
To exit setup mode:
You have two options:
To save all changes and reboot the device, select option 9 Save and exit from the
Change Setup menu. All values are stored in nonvolatile memory.
To exit the configuration mode without saving any changes or rebooting. Select
option 8 Exit without save from the Change Setup menu.