Filter
Top Products
Chapter 4: XPress DR+W
XPress DR+ User Guide 40
Transmission Data Rate
If the above TX Data rate is set to fixed, the selected data rate is the XPress DR+W’s
fixed transmission rate. If the above TX Data rate is set to auto, the selected data rate is
the XPress DR+W’s maximum data rate. Lower data rates allow for larger distances.
They may also be required when communicating with older devices. The default setting is
11 Mbps.
TX Data rate 0=1, 1=2, 2=5.5, 3=11
4=18, 5=24, 6=36, 7=54 Mbps (0) ? _
Note: The unit’s maximum data rate cannot be selected when TX Data rate is set to
auto.
Next Steps
1. Upon completing the IP and WLAN settings, select menu option 9 to save and exit
the XPress DR+W Setup Mode.
2. To configure the XPress DR+W further, continue to Chapter 6: Configuration Using
Web Manager or Chapter 7: Configuration Using Telnet or Serial Port (Setup Mode).