Filter
Top Products
4: Configuration Using XML
XPort® Pro Lx6 Embedded Device Server Command Reference 24
serial command
mode (Attribute of
“instance” is a
number.)
mode always, serial string,
disable
Default: disable
echo serial string enable, disable Default: enable
serial string Sets a string that can
be entered at boot time
to enter command
mode. This text may
specify binary
characters. Within []
use binary decimal up
to 255 or hex up to
0xFF. Within {} specify
decimal milliseconds
time delay.
signon message Sets a sign-on
message that is sent
from the serial port
when the device boots
and when the line is in
command mode. This
text may specify binary
characters. Within []
use binary decimal up
to 255 or hex up to
0xFF.
wait time Default: 5000
milliseconds
smtp relay address
relay port
syslog state enable, disable Default: disable
host
remote port Default: 514
severity log level none, emergency,
alert, critical, error,
warning, notice,
information, debug
Default: none
telnet state enable, disable Default: enable
port Default: 23
max sessions Default: 3
authentication enable, disable Default: disable
Group Name
(continued)
Group Item Value Name Value Options Additional
Information