Filter
Top Products
5: Commands and Levels
password
Enters the next lower level.
protocol tcp
Uses TCP protocol for accept mode tunneling.
protocol tcp aes
Uses TCP protocol with AES encryption for accept mode
tunneling.
protocol telnet
Uses Telnet protocol (with IAC) for accept mode tunnel-
ing.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show status
Displays tunnel accept status.
start character <control>
Sets the accept mode start character.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
tcp keep alive <milliseconds>
Enables TCP keep alive for accept mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
write
Stores the current configuration in permanent memory.
arp (config-arp) level commands
add <IP address> <MAC address>
Adds an entry to the ARP table, mapping an IP address to
a MAC address.
<ip address> = IP address to be mapped.
<mac address> = MAC address in colon-separated form.
clrscrn
Clears the screen.
exit
Exits to the configuration level.
remove all
Removes all entries from the ARP cache.
remove ip <IP address>
Removes an entry from the ARP cache.
<ip address> = address of the entry being removed.
show cache
Displays the ARP cache table.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
cli (config-cli) level commands
clrscrn
Clears the screen.
default inactivity timeout
The default inactivity timeout will apply to CLI sessions.
default login password
Restores the default CLI login password.
default quit connect line
Restores the default string to quit the "connect line",
"telnet", and "ssh" commands.
enable level password <text>
Sets the enable-level password.
exit
Exits to the configuration level.
inactivity timeout <minutes>
Sets the inactivity timeout for all CLI sessions.
line authentication disable
No password required for Line CLI users.
line authentication enable
Challenges the Line CLI user with a password.
login password <text>
Sets the CLI login password.
no enable level password
Removes the enable-level password.
no inactivity timeout
No inactivity timeout will apply to CLI sessions.
XPort® Pro Lx6 Embedded Device Server Command Reference 41