Filter
Top Products
5: Commands and Levels
quit connect line <control>
Sets the string used to quit the "connect line", "telnet", and
"ssh" commands.
The characters may be input as text or control.
A control character has the form <control>C.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
telnet
Change to menu level for Telnet configuration and status.
write
Stores the current configuration in permanent memory.
configure (config) level commands
arp
Changes to the command level for ARP configuration and
status.
cli
Change to menu level for CLI configuration and status
clrscrn
Clears the screen.
diagnostics
Enters the diagnostics level.
discovery
Enters the discovery level.
exit
Exits to the enable level.
ftp
Enters the ftp level.
http
Enters the http level.
icmp
Changes to the command level for ICMP configuration
and status.
icmpv6
Changes to the command level for ICMPv6 configuration
and status.
if <instance>
Changes to the interface configuration level.
ip
Changes to the command level for IP configuration and
status.
kill telnet <session>
Kills Telnet session with index from "show sessions"
show
Displays system information.
show history
Displays the last 20 commands entered during the current
CLI session.
smtp
Changes to the command level for SMTP configuration
and status.
syslog
Enters the syslog level.
terminal <line>
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be
configured.
terminal network
Enters the configure-terminal level for the network.
write
Stores the current configuration in permanent memory.
connect (tunnel-connect:1) level commands
block network disable
Forwards (tunnels) network data in connect mode tunnel-
ing.
block network enable
Discards all data coming in from the connect mode tunnel
before forwarding
it to the serial interface (generally used for debugging).
block serial disable
Forwards (tunnels) serial data in connect mode tunneling.
block serial enable
Discards all data coming in from the serial interface before
forwarding
it to the connect mode tunnel (generally used for debug-
ging).
XPort® Pro Lx6 Embedded Device Server Command Reference 42