Filter
Top Products
5: Commands and Levels
clrscrn
Clears the screen.
connect mode always
Enables the tunneling server to always establish tunneling
connections.
connect mode any character
Enables the tunneling server to establish a tunneling con-
nection when a
character is received on the corresponding line (serial
port).
connect mode disable
Disables connect mode tunneling.
connect mode modem control asserted
Enables the tunneling server to make tunneling connec-
tions when the modem
control pin is asserted.
connect mode modem emulation
Enables modem emulation for connect mode tunneling.
connect mode start character
Enables connect mode tunneling when the configured
start character
is received on the line.
cp output
Enters the next lower level.
default connect mode
Restores the default connect mode as "disable".
default host mode
Connects to the first host in the list that accepts the con-
nection.
default local port
Uses a random port number as the local port for establish-
ing tunneling
connections to other devices.
default reconnect time
Restores the default reconnect time value for connect
mode tunneling.
default start character
Defaults the connect mode start character.
email connect <number>
Sets an email profile to use to send an email alert upon
establishing
a connect mode tunnel.
<number> = the number of the email profile to use.
email disconnect <number>
Sets an email profile to use to send an email alert upon
closing
a connect mode tunnel.
<number> = the number of the email profile to use.
exit
Returns to the tunnel level.
flush serial disable
Characters already in the serial data buffer are retained
upon establishing
a connect mode tunneling connection.
flush serial enable
Flushes the serial data buffer upon establishing a connect
mode tunneling
connection.
flush start character disable
Enables forwarding of the connect start character into the
network.
flush start character enable
Disables forwarding of the connect start character into the
network.
host <instance>
Enters the next lower level.
Specify the instance for the next lower level.
host mode sequential
Connects to the first host in the list that accepts the con-
nection.
host mode simultaneous
Selects simultaneous connections to all hosts on the host
list.
kill connection
Disconnects the active connect mode tunneling connec-
tion or connections.
XPort® Pro Lx6 Embedded Device Server Command Reference 43