5: Commands and Levels
<number> = numeric value to watch for from the CP
group. Can be specified as
hex if prepended with “0x”.
write
Stores the current configuration in permanent memory.
cp (email-cp:2) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
group <text>
Specify a CP group that shall trigger an email.
<text> = configurable pin group.
no group
Disables the trigger to send an email.
no trigger value
Clears the value that shall trigger an email.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
trigger value <number>
Specify a value of the CP group that shall trigger an email.
<number> = numeric value to watch for from the CP
group. Can be specified as
hex if prepended with “0x”.
write
Stores the current configuration in permanent memory.
cp (email-cp:1) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
group <text>
Specify a CP group that shall trigger an email.
<text> = configurable pin group.
no group
Disables the trigger to send an email.
no trigger value
Clears the value that shall trigger an email.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
trigger value <number>
Specify a value of the CP group that shall trigger an email.
<number> = numeric value to watch for from the CP
group. Can be specified as
hex if prepended with “0x”.
write
Stores the current configuration in permanent memory.
cp output (tunnel-connect-cp_output:1) level commands
clrscrn
Clears the screen.
connection value <number>
Sets the value to output to the CP Group upon connect
mode connection.
<number> = binary to output (typically 1 or 0).
default connection value
Restores the default value for connect mode connection.
default disconnection value
Restores the default value for connect mode disconnec-
tion.
disconnection value <number>
Sets the value to output to the CP Group upon connect
mode disconnection.
<number> = binary to output (typically 1 or 0).
exit
Exits to the next higher level.
group <text>
Configures the CP Group to set upon making or breaking
a connect
mode connection.
XPort® Pro Lx6 Embedded Device Server Command Reference 45