Filter
Top Products
5: Commands and Levels
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
block network disable
Forwards (tunnels) network data in accept mode tunnel-
ing.
block network enable
Discards all data coming in from the accept mode tunnel
before forwarding
it to the serial interface (generally used for debugging).
block serial disable
Restores the default priority for the interface.
block serial enable
Sets the priority for interface.
<number> = priority number.
clrscrn
Clears the screen.
cp output
Enters the next lower level.
default accept mode
Restores the default accept mode as "always".
default local port
Uses the default port number as the local port for accept
mode tunneling.
The default port is 10000 + #, where # is the line number
for this tunnel.
default protocol
Restores the default protocol as "TCP".
default start character
Defaults the accept mode start character.
default tcp keep alive
Restores the default 45 second accept mode TCP keep
alive timeout.
email connect <number>
Sets an email profile to use to send an email alert upon
establishing
an accept mode tunnel.
<number> = the number of the email profile to use.
email disconnect <number>
Sets an email profile to use to send an email alert upon
closing
an accept mode tunnel.
<number> = the number of the email profile to use.
exit
Returns to the tunnel level.
flush serial disable
Characters already in the serial data buffer are retained
upon establishing
an accept mode tunneling connection.
flush serial enable
Flushes the serial data buffer upon establishing an accept
mode tunneling
connection.
flush start character disable
Enables forwarding of the accept start character into the
network.
flush start character enable
Disables forwarding of the accept start character into the
network.
kill connection
Disconnects the active accept mode tunneling connection.
local port <number>
Sets the port to use for accept mode tunneling.
<number> = number of the port to use.
no aes decrypt key
Removes the accept tunnel AES decrypt key.
no aes encrypt key
Removes the accept tunnel AES encrypt key.
no email connect
Discontinues sending email alerts upon establishing an
accept mode tunnel.
no email disconnect
Discontinues sending email alerts upon closing an accept
mode tunnel.
no tcp keep alive
Disables the accept mode TCP keep alive timeout.
XPort® Pro Lx6 Embedded Device Server Command Reference 40