Filter
Top Products
5: Commands and Levels
<text> = CP Group.
no group
Removes the CP Set Group for connect mode.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
cp output (tunnel-accept-cp_output:1) level commands
clrscrn
Clears the screen.
connection value <number>
Sets the value to output to the CP Group upon accept
mode connection.
<number> = binary to output (typically 1 or 0).
default connection value
Restores the default value for accept mode connection.
default disconnection value
Restores the default value for accept mode disconnection.
disconnection value <number>
Sets the value to output to the CP Group upon accept
mode disconnection.
<number> = binary to output (typically 1 or 0).
exit
Exits to the next higher level.
group <text>
Configures the CP Group to set upon making or breaking
an accept
mode connection.
<text> = CP Group.
no group
Removes the CP Set Group for accept mode.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
cpm (cpm) level commands
add <cp> to <group>
Adds the specified CP to the specified group.
<cp> = configurable pin.
<group> = the name of the group to which you want to
add the CP.
add <cp> to <group> <bit>
Adds a specified CP to a specified group at a specified bit
position.
<cp> = configurable pin.
<group> = the name of the group to which you want to
add the CP.
<bit> = bit position.
clrscrn
Clears the screen.
create <group>
Creates a configurable pin (CP) group.
<group> = the name for the new group.
delete <cp> from <group>
Removes a CP from a specified group and sets the CP to
its default
configuration of input.
<cp> = configurable pin.
<group> = the name of the group.
delete <group>
Removes a group and resets all CPs in that group to the
default
configuration of input.
<group> = the name of the group.
disable <group>
Disables the specified group.
<group> = the name of the group.
XPort® Pro Lx6 Embedded Device Server Command Reference 46