Filter
Top Products
5: Commands and Levels
exit
Exits to the configuration level.
no relay address
Removes the SMTP relay address.
relay address <text>
Sets an SMTP relay address to direct all outbound email
messages through
a mail server.
relay port <number>
Sets the SMTP relay port.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
syslog (config-syslog) level commands
clrscrn
Clears the screen.
default remote port
Restores the default syslog remote port.
default severity log level
No logging.
exit
Returns to the config level.
host <text>
Sets the address of the syslog recipient.
<text> = IP address or name of the host.
no host
Removes the address of the syslog recipient.
remote port <number>
Sets the syslog remote port.
<number> = number of the remote port used when mak-
ing a syslog connection.
severity log level alert
Log only Alert and more severe events.
severity log level critical
Log only Critical and more severe events.
severity log level debug
Log all events.
severity log level emergency
Log only Emergency events.
severity log level error
Log only Error and more severe events.
severity log level information
Log only Information and more severe events.
severity log level none
No logging.
severity log level notice
Log only Notice and more severe events.
severity log level warning
Log only Warning and more severe events.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show statistics
Displays the syslog statistics.
state disable
Disables syslog logging.
state enable
Enables syslog logging.
write
Stores the current configuration in permanent memory.
telnet (config-cli-telnet) level commands
authentication disable
No password required for Telnet users.
authentication enable
Challenges the Telnet user with a password.
clrscrn
Clears the screen.
default max sessions
Restores the default maximum allowed concurrent incom-
ing Telnet sessions.
default port
Restores the default local port to the Telnet server.
exit
Exits to the CLI level.
max sessions <number>
Sets the maximum allowed concurrent incoming Telnet
XPort® Pro Lx6 Embedded Device Server Command Reference 83