Filter
Top Products
5: Commands and Levels
show history
Displays the last 20 commands entered during the current
CLI session.
state disable
Prevents ICMP packets from being sent or received.
state enable
Allows ICMP packets to be sent and received.
write
Stores the current configuration in permanent memory.
icmpv6 (config-icmpv6) level commands
clrscrn
Clears the screen.
exit
Exits to the configuration level.
show history
Displays the last 20 commands entered during the current
CLI session.
show neighbors
Displays IPv6 neighbor cache.
write
Stores the current configuration in permanent memory.
if 1 (config-if:eth0) level commands
bootp disable
Disables BOOTP.
bootp enable
Enables BOOTP.
clrscrn
Clears the screen.
default gateway <IP address>
Sets the configurable gateway IP address to the default
value.
default mtu
Restores the default Maximum Transmission Unit (MTU)
size.
dhcp client id <text>
Sets the DHCP client id.
dhcp disable
Disables DHCP.
dhcp enable
Enables DHCP.
dhcpv6 disable
Disabled DHCPv6 support.
dhcpv6 enable
Enables DHCPv6 support.
domain <text>
Sets the domain name.
<text> = name of the domain.
exit
Exits to the config level.
hostname <text>
Sets the host name.
<text> = name of the host.
ip address <ip address/cidr>
Sets the IP address and network mask.
Formats accepted:
192.168.1.1 (default mask)
192.168.1.1/24 (CIDR)
"192.168.1.1 255.255.255.0" (explicit mask)
ipv6 address <ip address/prefix_length>
Sets the IPv6 address and network prefix length.
Formats accepted:
3456:abcd::456:de10/64 (address and prefix length)
ipv6 autoconf enable
Enables support for stateless autoconfiguration of IPv6
addresses.
ipv6 default gateway <IP address>
Sets the IPv6 default gateway.
link
Enter link configuration level
mtu <bytes>
Sets the Maximum Transmission Unit (MTU) size.
no default gateway
Clears the default gateway.
no dhcp client id
Clears the DHCP client ID.
no domain
Clears the domain name.
no hostname
Clears the host name.
XPort® Pro Lx6 Embedded Device Server Command Reference 76