Filter
Top Products
5: Commands and Levels
port <number>
Sets the remote port to use for connect mode tunneling.
<number> = number of the port to use.
protocol tcp
Uses TCP protocol for connect mode tunneling.
protocol tcp aes
Uses TCP protocol with AES encryption for connect mode
tunneling.
protocol telnet
Uses Telnet protocol (with IAC) for connect mode tunnel-
ing.
protocol udp
Uses UDP protocol for connect mode tunneling.
protocol udp aes
Uses UDP protocol with AES encryption for connect mode
tunneling.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show statistics
show connection statistics
tcp keep alive <milliseconds>
Enables TCP keep alive for connect mode tunneling and
sets the timer.
<milliseconds> = timer value, in milliseconds.
write
Stores the current configuration in permanent memory.
host 3 (tunnel-connect-host:1:3) level commands
address <text>
Sets the remote host to establish tunneling connections
with.
<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
aes decrypt key text <text>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
aes encrypt key <hexadecimal>
Sets the connect tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
aes encrypt key text <text>
Sets the connect tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
auto show statistics
show connection statistics
clrscrn
Clears the screen.
default protocol
Restores the default protocol as "TCP".
default tcp keep alive
Restores the default 45 second connect mode TCP keep
alive timeout.
XPort® Pro Lx6 Embedded Device Server Command Reference 66