Lenovo 20AX000VUS Laptop User Manual


 
Default values are in boldface. The default settings are already optimized for you. If you consider
changing the computer conguration, proceed with extreme caution. Setting the conguration incorrectly
might cause unexpected results.
On each submenu, press Enter to show selectable options and select a desired option, or type desired
values from the keyboard directly.
Some items are displayed on the menu only if the computer supports the corresponding features.
The following table lists the Cong menu items.
Table 4. Cong menu items
Menu item
Submenu item Selection Comments
Wake On LAN
Disabled
AC Only
AC and Battery
Enable the system to Power on
when the Ethernet controller
receives a magic packet (a
special network message).
If you select AC Only, the Wake
on LAN function is enabled only
when the ac power adapter is
attached.
If you select AC and Battery,
the Wake on LAN function is
enabled with any power sources.
Notes:
The magic packet type Wake
on LAN requires ac power.
The Wake on LAN function
does not work when a hard
disk password is set.
Ethernet LAN Option ROM
(for Legacy Only boot
mode or Both with Legacy
rst)
Disabled
Enabled
Load the Ethernet LAN Option
ROM to enable startup from an
integrated network device.
UEFI IPv4 Network Stack
(for Legacy Only boot
mode or Both with Legacy
rst)
Disabled
Enabled
Enable or Disable UEFI IPv4
Network Stack for UEFI
environment
UEFI IPv6 Network Stack
(for UEFI Only boot mode
or Both with UEFI rst)
Disabled
Enabled
Enable or Disable UEFI IPv6
Network Stack for UEFI
environment
UEFI PXE Boot Priority
(for UEFI Only boot mode
or Both with UEFI rst)
IPv6 First
IPv4 First
Select Network Stack Priority for
UEFI PXE Boot.
Network
Wireless LAN Radio
On
Off
If you select On, the internal
wireless radio is turned on. If you
select Off, the internal wireless
radio is turned off.
78 User Guide