Lenovo X230I Tablet User Manual


 
To change the startup sequence temporarily so that the system starts up from a different drive, do the
following:
1. Turn off the computer.
2. Turn on the computer; then, while the ThinkPad logo is displayed, press F12.
3. Select the device you want to start rst.
Note: The Boot menu will be displayed when the system cannot boot from any devices or the operating
system cannot be found.
The following table lists the Startup menu items.
Notes:
Default values are in boldface.
On each submenu, press the Enter key to show selectable options and select a desired option.
Some items are displayed on the menu only if the computer supports the corresponding features.
Table 7. Startup menu items
Menu item Value
Comments
Boot
See “Changing the startup sequence” on
page 119
.
Network Boot
Select the boot device when the system
wakes from LAN. If Wake On LAN is
enabled, the network administrator can
turn on all of the computers in a LAN
remotely by use of network management
software.
UEFI/Legacy Boot
Both
UEFI Only
Legacy Only
Select system boot capability.
Both: The system will boot following
the UEFI/Legacy Boot Priority
setting.
UEFI Only: The system will boot from
the UEFI enabled operating system.
Legacy Only: The system will boot
from any operating system other than
the UEFI enabled one.
Note: If you select UEFI Only, the
system cannot boot from the bootable
devices that do not have the UEFI
enabled operating system.
UEFI/Legacy Boot Priority
UEFI First
Legacy First
Select priority of boot options between
UEFI and Legacy.
Boot Mode
Quick
Diagnostics
Screen during the POST:
Quick: The ThinkPad Logo screen is
displayed.
Diagnostics: Text messages are
displayed.
Note: You also can enter Diagnostic
mode by pressing Esc during the POST.
120 User Guide