Filter
Top Products
Note: The operating speed of the memory module has dependency on the system conguration. In some
conditions, the memory in your computer might not be able to operate at the maximum speed.
Attention: Before you start installing a memory module, touch a metal table or a grounded metal object. This
action reduces any static electricity from your body. The static electricity could damage the memory module.
To replace a memory module, do the following:
1. Turn off the computer; then disconnect the ac power adapter and all cables from the computer.
2. Close the computer display, and turn it over.
3. Remove the battery. See “Replacing the battery” on page 67.
4. Loosen the screws that secure the memory slot cover 1 , then remove the cover 2 .
If two memory modules already are installed in the memory slots, remove a memory module to make
room for the new one by pressing out on the latches on both edges of the socket at the same time 1
and removing the memory module 2 . Save the removed memory module for future use.
5. Find the notch on the contact edge side of the memory module you are installing.
Attention: To avoid damaging the memory module, do not touch its contact edge.
74 User Guide