Filter
Top Products
CHECK THE PAPER TYPE AND WEIGHT SETTINGS
Make sure the paper type and weight settings match the paper loaded in the tray:
1 From the printer control panel Paper menu, check the Paper Type and Paper Weight settings.
2 Before sending the job to print, specify the correct type setting:
• For Windows users, specify the type from Print Properties.
• For Macintosh users, specify the type from the Print dialog.
COLOR SAVER MAY BE SET TO ON
Turn Color Saver off in the printer control panel Quality menu.
THE TONER MAY BE LOW
Replace the toner cartridge.
THE TONER CARTRIDGE MAY BE WORN OR DEFECTIVE
Replace the toner cartridge.
Repeating defects
These are possible solutions. Try one or more of the following:
Replace the toner cartridge if the defects occur every:
• 33.0 mm (1.30 in.)
• 35.3 mm (1.39 in.)
Replace the photoconductor if the defects occur every:
• 28.3 mm (1.11 in.)
• 72.4 mm (2.85 in.)
Replace the fuser if the defects occur every:
• 47.4 mm (1.87 in.)
• 94.8 mm (3.73 in.)
• 113.0 mm (4.45 in.)
Troubleshooting 185