Filter
Top Products
Notes:
• An adapter may be necessary if your flash drive does not fit directly into the port.
• The printer reads only one media device at a time. If you insert more than one media device, you will be asked
to select which one you wish to use and remove the other one.
2 Wait for the printer to read the flash drive.
Connecting a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera
without using a computer. You can connect a PictBridge-enabled digital camera to the printer, and use either the
printer or the camera to control printing photos.
1 Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the camera.
2 Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
• Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see
the camera documentation.
• The printer reads only one media device at a time.
3 If the PictBridge connection is successful, the following appears on the display: Camera connected. Refer
to Camera display or Camera User Manual for further information. If you want to use
the camera to control printing photos, refer to the instructions in the camera documentation.
4 If no selections were specified on your digital camera beforehand, you can use the printer to control printing
photos. Press
to make the PictBridge menu appear on the control panel display. For more information, see
“Using the PictBridge menu” on page 16.
Connecting photo storage devices
22