Filter
Top Products
Cartridge Error
1 Remove the print cartridge.
2 Disconnect the power supply cord from the electrical outlet.
3 Reconnect the power supply cord to the electrical outlet.
4 If the button is not lit, press .
5 Reinsert the cartridge.
6 If the cartridge error returns, install a new cartridge. For more information, see “Installing the print cartridge” on
page 38.
Cartridge missing
The print cartridge is missing or is not installed properly. For more information, see “Installing the print cartridge” on
page 38.
Cover open
Make sure that the access cover is closed.
Invalid Device
The camera you connected to the printer is not communicating using PictBridge.
1 Disconnect the camera from the printer.
2 Check to see if the camera is PictBridge-enabled. For more information, see the camera documentation.
Invalid Image File
The memory card or flash drive you inserted is empty or contains files that cannot be read by the printer.
Use another memory card or flash drive. For more information, see “Inserting a memory card” on page 20 or “Inserting
a flash drive” on page 21.
Ink level
Message Ink level
Your Color Cartridge will need to be replaced soon.
25% full
Your Color Cartridge will need to be replaced soon.
15% full
Your Color Cartridge will need to be replaced very soon.
5% full
Note: These messages and percentages may not apply to the starter cartridge that shipped with your printer.
1 Install a new print cartridge if necessary. For more information, see “Installing the print cartridge” on page 38.
To order supplies, see “Ordering supplies” on page 42.
2 Press to continue.
Troubleshooting
51