Lexmark 782n Printer User Manual


 
Selecting print media
68
Understanding paper and specialty media guidelines
transportation environment is very different from the printer environment. Thick paper may also require a longer
conditioning period because of the mass of material.
Grain direction
Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running the length of the
paper, or grain short, running the width of the paper.
For 60 to 90 g/m
2
(16 to 24 lb bond) paper, grain long fibers are recommended.
Fiber content
Most high-quality xerographic paper is made from 100% chemically pulped wood. This content provides the paper with a
high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as
cotton possesses characteristics that can result in degraded paper handling.
Unacceptable paper
Note: Papers such as carbonless, very light papers and magazine paper should be copied using the flatbed.
Do not use the ADF for this type of paper.
The following papers are not recommended for use with the printer:
Chemically treated papers used to make copies without carbon paper, also known as carbonless papers,
carbonless copy paper (CCP), or no carbon required (NCR) paper
Preprinted papers with chemicals that may contaminate the printer
Preprinted papers that can be affected by the temperature in the printer fuser
Preprinted papers that require a registration (the precise print location on the page) greater than ±0.09 in., such as
optical character recognition (OCR) forms
In some cases, registration can be adjusted with the software application to successfully print on these forms.
Coated papers (erasable bond), synthetic papers, or thermal papers
Rough-edged, rough or heavily textured surface papers or curled papers
Recycled papers containing more than 25% post-consumer waste that do not meet DIN 19 309
Paper having a weight less than 60 g/m
2
(16 lb)
Multiple-part forms or documents
Transparencies
The MFP can print directly on transparencies designed for use in laser printers. Print quality and durability depend on the
transparency used. Always print samples on the transparencies you are considering before buying large quantities.
The Paper Type setting should be set to Transparency to help prevent jams. In Macintosh, be sure to set the Paper Type to
Transparency in the Print dialog on the Imaging choice in the Copies & Pages pop-up menu.
Use transparencies designed specifically for laser printers. Transparencies must be able to withstand temperatures of
230°C (446°F) without melting, discoloring, offsetting or releasing hazardous emissions. For detailed information, see the
Card Stock & Label Guide, which is available on the Lexmark Web site at www.lexmark.com.
Transparencies can be fed automatically from the standard tray or the multipurpose feeder. Before loading transparencies,
fan the stack to prevent sheets from sticking together.
Be careful when you handle transparencies. Fingerprints on the surface of the transparency cause poor print quality.