Filter
Top Products
Installing an optional hard disk
128
Installing and removing options
Installing an optional hard disk
Note: A small Phillips screwdriver is needed to attach the hard disk to the mounting plate.
Note: If an option card has been installed, it may need removing before installing the hard disk.
1 Remove the system board metal plate (see Accessing the system board).
2 Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package.
3 Align the ribbon cable connector with the connector pins on the hard disk.
4 Attach the ribbon cable to the hard disk.
5 Align the screw holes on the mounting plate with the holes in the hard disk.
6 Secure the mounting plate to the hard disk with the screws.
Warning: Hard disks are easily damaged by static electricity. Touch something metal on the
printer before touching a disk.