Filter
Top Products
Configuring the printer for color printing and replacing the supplies
34
Printing
3 Release the buttons when the clock appears.
CONFIG MENU appears on the first line of the display.
The following messages appear individually as prompts for the replacement of photoconductor units and color
toner cartridges.
As the photoconductor units stored in the box are replaced in the printer, check the clear end of the
photoconductor unit for color residue.
The residue color should match the color label located on the transfer belt in the printer.
4 Press until Black Only Mode appears, and then press .
5 Press until Off appears, and then press .
The Submitting Selection message appears.
6 Press until Exit Config Menu appears, and then press to complete the procedure.
84 Cyan PC Unit missing 31 Missing or defective Cyan cartridge
84 Magenta PC Unit missing 31 Missing or defective Magenta cartridge
84 Yellow PC Unit missing 31 Missing or defective Yellow cartridge
Clear end