Filter
Top Products
Clearing jams behind the inner door
69
Clearing jams
If the media fed from Tray 2, but is caught between Tray 1 and Tray 2 in the media path, the operator panel may indicate a
200.xx Paper Jam instead. If so, clear the jam as follows.
1 Remove the standard tray.
2 Pull the jammed media up and then out of the tray.
3 Insert the tray.
Clearing jams behind the inner door
The media is jammed behind the inner door, but not under the photoconductor units. The operator panel indicates a 200.xx
Paper Jam.
Warning: To avoid overexposing the photoconductor units to light, do not leave the inner door open longer than
10 minutes while clearing this jam.
1 Open the upper door and the inner door. The lower door comes open with the inner door.
2 Pull the jammed media up and out.
3 Close the lower door. This closes the inner door. Close the upper door.