Filter
Top Products
92
Setup Menu
Use this menu to change printer warm-up time, how long the printer waits when it detects an error,
what language you want displayed on the operator panel, whether you want to be alerted when the
printer needs attention, and how long the printer waits before printing the next page.
• PRINT TIMEOUT
• AUTO CONTINUE
• DISPLAY LANGUAGE
• ALARM CONTROL
• INK LOW ALARM
• DRY TIME DELAY
Print Timeout
Use the Print Timeout setting to set the number of seconds the printer waits before printing the last
page of a job that does not end with a command to print the page. When Print Timeout is disabled, the
printer does not print the last page of a job until it has enough information to fill a page or it receives a
Form Feed command.
Auto Continue
If the printer is unattended on a network, use the Auto Continue setting to tell the printer how long to
wait after detecting one of the following errors before resuming printing:
• 34 Short Paper
• Memory Full
• 54 Std Par ENA
• 56 Std Parallel Port Disabled
• 88 Cartridge Low
If Auto Continue is disabled, the printer stops and waits for operator intervention.
Menu item Value
Print timeout Disabled*
=1...240 (90*)
*Default setting
Menu item Value
Auto Continue Disabled*
=5...255
*Default setting