Filter
Top Products
Selecting an output location
38
3 Close the top cover to avoid dark edges on the scanned image.
Selecting an output location
The MFP has two output locations: the front output tray and the rear paper exit.
Front output tray
The front output tray should be used to output plain paper only. Use the rear paper exit for envelopes,
labels, card stock, and transparencies. To use the front output tray, make sure the rear cover is
closed.
This tray should be used for most jobs and is recommended for jobs requiring over 50 sheets of plain
paper continuously.
Note: If problems, such as excessive curl, occur when using the front output tray, try using
the rear output slot.
Rear paper exit
You can use the rear paper exit for all paper types; however, for envelopes, labels, card stock, and
transparencies, using this slot is recommended. To use the rear paper exit, open the rear cover.
Paper is output face-up through the rear paper exit, with the last page on the top. To avoid paper
jams, do not open or close the rear cover while printing.
Rear paper exit
Front output
tray