Filter
Top Products
‑ On
‑ On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then press
twice quickly to see the supplemental light sequence.
‑ On
‑ Blinking
‑ On
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one or more of
the following:
• From the printer control panel, press to continue printing.
• Unplug the router, then wait for 30 seconds, and then plug the router back again.
• Turn off the printer, wait for about 10 seconds, and then turn the printer back on.
• Update the network firmware in the printer or print server. For more information, visit the Lexmark Web site at
http://support.lexmark.com.
Troubleshooting 134