Lexmark MX310DN Printer User Manual


 
Use To
Feed Direction
Short Edge
Long Edge
Specify the feed direction if the paper can be loaded in either direction.
Notes:
Short Edge is the factory default setting.
Long Edge appears only when the longest edge is shorter than the
maximum width supported in the tray.
Reports menu
Reports menu
Use To
Menu Settings Page Print a report containing information about the paper loaded into trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information.
Device Statistics Print a report containing printer statistics such as supply information and details
about printed pages.
Network Setup Page Print a report containing information about the network printer settings, such as
the TCP/IP address information.
Note: This menu item appears only in network printers or printers connected
to print servers.
Shortcut List Print a report containing information about configured shortcuts.
Fax Job Log Print a report containing information about the last 200 completed faxes.
Note: This menu item is available only when Enable Job Log is set to On in the
Fax Settings menu.
Fax Call Log Print a report containing information about the last 100 attempted, received, and
blocked calls.
Note: This menu item is available only when Enable Job Log is set to On in the
Fax Settings menu.
Copy Shortcuts Print a report containing information about copy shortcuts.
Email Shortcuts Print a report containing information about email shortcuts.
Fax Shortcuts Print a report containing information about fax shortcuts.
FTP Shortcuts Print a report containing information about FTP shortcuts.
Profiles List Print a list of profiles stored in the printer.
Print Fonts Print a report of all the fonts available for the printer language currently set in
the printer.
Asset Report Print a report containing asset information including the printer serial number
and model name. The report contains text and UPC bar codes that can be scanned
into an asset database.
Understanding the printer menus 108