Filter
Top Products
4 Navigate to:
Copy to >
> select the tray containing the paper size and type you want to use > > select the number of
copies or enter a number on the keypad >
5 If there are no trays that contain the paper size and type you want to use, then do the following:
a Navigate to:
Copy to >
> Manual Feeder > > select the paper size > > select the paper type >
b Load the size and type of paper into the multipurpose feeder, and then press .
Note: If you want to copy another document, then place it on the scanner glass, press the left or right arrow button
to scroll to Scan the Next Page, and then press
.
6 Press the left or right arrow button to scroll to Finish the Job, and then press .
Copying on both sides of the paper (duplexing)
1 Load a document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 From the printer control panel, navigate to:
> Copy > > Sides (Duplex) > select a duplex option > select the number of copies or enter a number on
the keypad >
Notes:
• The first number refers to the original document. The second number refers to the copy. For example, select
2-sided to 2-sided if you have two-sided original documents and you want two‑sided copies.
• If you want to copy another document, then place it on the scanner glass, press the left or right arrow
button to scroll to Scan the Next Page, and then press
.
4 Press the left or right arrow button to scroll to Finish the Job, and then press .
Reducing or enlarging copies
Copies can be scaled from 25% to 400% of the original document size.
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Copying 61